Swingmaster Model SL180-20 Swingloader

Download Brochure:

Capacity:

  • 20,000 pound lift and carry capacity
  • 180° swing (90° each side of center)

Dimensions:

  • GVW 54,000 lbs. with hirail gear
  • Length 243” | Width 102” | Height 136”
Engine MakeCummins
Max. Horsepower194 @ 2000 rpm
Peak Torque (Foot-Pounds)650 @ 1300 rpm
Governed RPM2200 rpm
Stall Multiplication Ratio1.82:1.00
DriveOffset
Drive Ratio0.965:1.00
Pump Drive Ratio0.951:1.00
Oil FillerRemote mounted
Type“Six Speed” Power Shift
Number of Drive Gear Ratios3
Number of Gear Ranges2
Axle DisconnectRear Axle
Clutch CutoutStandard
Tires16 x 25
Standard WheelsSingle dish 11.25-2 Rim 65.50 inches inside to inside of Tires (Loaded Section)
TypeRigid Frame with Steerable Axles
ControlFull power Hydraulic
Selectable Modes4 Wheels, Crab, Front Only and Rear Only
Turning Radius (Curb Clearance)20 feet 4 inches
CylindersDouble acting, 3″ bore, 8.9″ stroke, chrome plated piston rods.
TypeOutboard Style Dual Caliper Disc Brakes
Disc Diameter19 in
LocationAxle Wheel Ends
ActuationDual Circuit System Air over Hydraulic
ControlFoot control in Cab
TypeMechanical Disc
Diameter13 in
LocationFront Axle Input Yoke
ActuationSpring Applied, Air Released
ControlAir control button in cab
Voltage12 V
Alternator Output200 A
Standard GaugesAir Pressure
Engine Oil Pressure
Engine Tachometer
Engine Water Temperature
Fuel Tank Level
Hourmeter
Torque Converter Oil Temperature
Torque Converter Pressure
Voltmeter
Battery1900 Cold Cranking Amps with Disconnect Switch
TypeDry, Two Stage (Centrifugal Precleaner, Paper Main Element) with safety element
Restriction IndicatorStandard, Mounted alongside air cleaner
Tank Capacity60 gal
FiltersSpin on Primary Strainer and Spin on Secondary Filte
Reservoir85 Gallon with Removable Cleanout Cover and Padlockable Filler Capacity
Suction Strainers100 Mesh Strainers Mounted in the Hydraulic Tank on Each Pump Suction Line
Primary PumpDouble section gear type, direct driven from accessory drive on torque converter. Supplies oil flow for Boom, Attachment, and Hi-rail functions.
Secondary PumpDouble section vane type, direct driven from accessory drive on torque converter. Supplies oil flow for Steering and Remote controls.
PrimaryTwo spool, hydraulic pilot operated with built in relief valve
SecondaryThree spool, hydraulic pilot operated with built in relief valve
ControlsLow Effort Hydraulic Remote Controls for Boom Lift, Boom Swing, Tote Hook, Tilt with Manual, and Override on Control Valves.
Boom Lift2 Double acting 5.5″ bore x 42″ stroke with Hydraulic Holding Valves
Attachment Tilt1 Double acting 7″ bore x 35″ stroke with Hydraulic Holding Valves
Filtersin Tank Mounted, return line cartridge type, 10 micron nominally rated element
Swivel9 Port Hydraulic
Type DriveCylinder, Chain and Sprocket
Rotation180 degrees (90 degrees each side of center)
SpeedEquivalent to 3.0 rpm
Weight54,000 w/ Hi-rail
Chassis Length242.88 in
Chassis Width102 in
Height136 in
Call Now Button